| |
Harderlloy Wear Plate is a composite plate consisting of a common carbon steel base plate and an alloyed wear resistant cladding of self produced high hardness self shielded open arc wire. The carbide of the wear plate's fine texture was fiberized distributed, and the fiber's direction is vertical to the plate surface, while the surface hardness could gain to HRc62 above. In a typical temperature range, there will be second hardening, which might improve its wear resistant performances and make the hardness 30-50 times compared to common carbon steel.
Because Harderlloy Wear Plate utilizes dedicated process techniques, the wear resistant layer is breadthwise cracked, so the plate could be lengthways bended. So, although the wear plate's hardness is above HRc60, but it could be cut, bended, drilled, welded, and could have all the machining method just like a common carbon steel plate.
Harderlloy Wear Plate's wear resistant layer was composed mainly of high chromium, and also of manganese, molybdenum, columbium etc. The alloy carbide has a strong stability in high temperature environment, and also a high hardness and good oxidation-inhibitory performance, it could be normally used under 500 ¡æ .
It is metallurgy joined between Harderlloy Wear Plate's base plate and wear resistant layer. While the fiberized distributed high hardness carbide was set on high toughness base plate, the wear plate gains both the performances of high hardness and high toughness. So it has good impact resistance capability and will not shed in the working environment.
Compared to other domestic products, Harderlloy Wear Plate has another characteristic of smooth and pretty surface which expand its applicability.
Standard Models:
Model name |
Thickness of base plate (mm) |
Thickness of wear resistant layer (mm) |
Total thickness (mm) |
Hardness(HRc) |
Length¡ÁWidth (mm)¡Á(mm) |
HB6+4D |
6 |
4 |
10 |
54-58 |
1200*2000 |
HB6+4G |
6 |
4 |
10 |
58-62 |
HB6+6D |
6 |
6 |
12 |
57-61 |
HB6+6G |
6 |
6 |
12 |
62-66 |
HB8+6D |
8 |
6 |
14 |
57-61 |
HB8+6G |
8 |
6 |
14 |
62-66 |
• The base plate were outsourced, which might have a deflection of ¡À 0.5mm, while might cause the deflection of total thickness. Please announce your requested total thickness if you need in your order.
• There is common stock for the standard models, but the delivery time for dedicated models will be longer.
• The length direction is as the weld bead direction.
• We could machine to your design, processing fees and processing loss extra.
|
